 Click image for close-up
FPCS12D-2013 (12V DC Diesel Fire Pump Controls)
IMAGE 16-1:
12V DC Diesel Pump Controller with HMI touchscreen
The FPCS12D-2014 Diesel Fire Pump Control panel is manufactured to comply with AS2941 and is supplied with 2 starting solenoids rated at 100A continuous (600A for 30 seconds).
The panel is standard with:
Circuit breakers for each battery and engine instruments
Complies to AS 2941-2013
Terminals to connect 240V 16A Jacket Heater
Smart Battery charger for each battery
Engine starting solenoids for manual & starting battery
Engine instruments are located on panel front door
Inca FPCS2014 OPLC located on panel facia to control starting cycle, alarm outputs & battery voltage monitoring. Also Displaying engine run soeed, battery voltages, engine hours run.
The screen displays Battery voltages low/Battery chargers fail/Pump ready to start/Engine fail to start/Alarm silenced/Engine over speed shutdown.
Easy system setup using HMI touch screen menu
Local engine stop push button with terminals for remote engine stop
Audible alarm & mute for engine run & common fault
Voltage free contacts for FIB for Engine run/Common fault/Power fail
Engine overspeed shutdown protection with manual reset including test facility.
Loose supply of oil pressure sender & Switch, oil or water temperature sender and water temperature switch (optional)
All housed in a 700mmH x 500mmW x 250mmD metal enclosure painted in signal red.
Indicating lights for:
Main Supply ON
Main Supply Fail
Engine Run
High Water Temperature
Low Oil Pressure
Alarm Muted
Low Fuel Level
|
Click image for close-up
FPCS24D-2013 (24V DC Diesel Fire Pump Controls)
IMAGE 16-1:
24V DC Diesel Pump Controller with HMI touchscreen
The FPCS24D-2014 Diesel Fire Pump Control panel is manufactured to comply with AS2941 and is supplied with 2 starting solenoids rated at 100A continuous (600A for 30 seconds).
The panel is standard with:
Circuit breakers for each battery and engine instruments
Complies to AS 2941-2013
Terminals to connect 240V 16A Jacket Heater
Smart Battery charger for each battery
Engine starting solenoids for manual & starting battery
Engine instruments are located on panel front door
Inca FPCS2014 OPLC located on panel facia to control starting cycle, alarm outputs & battery voltage monitoring. Also Displaying engine run soeed, battery voltages, engine hours run.
The screen displays Battery voltages low/Battery chargers fail/Pump ready to start/Engine fail to start/Alarm silenced/Engine over speed shutdown.
Easy system setup using HMI touch screen menu
Local engine stop push button with terminals for remote engine stop
Audible alarm & mute for engine run & common fault
Voltage free contacts for FIB for Engine run/Common fault/Power fail
Engine overspeed shutdown protection with manual reset including test facility.
Loose supply of oil pressure sender & Switch, oil or water temperature sender and water temperature switch (optional)
All housed in a 700mmH x 500mmW x 250mmD metal enclosure painted in signal red.
Indicating lights for:
Main Supply ON
Main Supply Fail
Engine Run
High Water Temperature
Low Oil Pressure
Alarm Muted
Low Fuel Level
|
Click image for close-up
FPC12D-2014 (12V DC Diesel Fire Pump Controls)
IMAGE 7-1:
12V DC Diesel Pump Controller with HMI touchscreen
The FPC12D-2014 Diesel Fire Pump Control panel is manufactured to comply with AS2941 and is supplied with 2 starting solenoids rated at 100A continuous (600A for 30 seconds).
The panel is standard with:
Circuit breakers for each battery and engine instruments
Complies to AS 2941-2013
Terminals to connect 240V 16A Heating Jacking pump
Smart Battery charger for each battery with temperature compensated output
Engine starting solenoids for manual & starting battery
Engine instruments are located on panel HMI
Inca FPC2014 OPLC located on panel facia to control starting cycle, alarm outputs & battery voltage monitoring. Also Displaying engine run soeed, battery voltages, engine hours run, engine oil pressure & engine water or oil temperature. Engine over speed shutdown protection with manual reset including test facility.
The screen displays all indication including 240V supply on/Battery voltages low/Battery chargers fail/Low oil pressure/High engine temperature/Pump ready to start/Engine fail to start/Alarm silenced/Engine over speed shutdown
Easy system setup using HMI touch screen menu
Local engine stop push button with terminals for remote engine stop
Audible alarm & mute for engine run & common fault
Voltage free contacts for FIB for Engine run/Common fault/Power fail
Data logging all fault conditions, manual & auto start events up to 5000 logs
Engine overspeed shutdown protection with manual reset including test facility.
Loose supply of oil pressure transducer, oil or water temperature sender (optional)
All housed in a 700mmH x 500mmW x 250mmD metal enclosure painted in signal red.
|
Click image for close-up
FPC24D-2014 (24V DC Diesel Fire Pump Controls)
IMAGE 7-1:
24V DC Diesel Pump Controller with HMI touchscreen
The FPC24D-2014 Diesel Fire Pump Control panel is manufactured to comply with AS2941 and is supplied with 2 starting solenoids rated at 100A continuous (600A for 30 seconds).
The panel is standard with:
Circuit breakers for each battery and engine instruments
Complies to AS 2941-2013
Terminals to connect 240V 16A Heating Jacking pump
Smart Battery charger for each battery with temperature compensated output
Engine starting solenoids for manual & starting battery
Engine instruments are located on panel HMI
Inca FPC2014 OPLC located on panel facia to control starting cycle, alarm outputs & battery voltage monitoring. Also Displaying engine run soeed, battery voltages, engine hours run, engine oil pressure & engine water or oil temperature. Engine over speed shutdown protection with manual reset including test facility.
The screen displays all indication including 240V supply on/Battery voltages low/Battery chargers fail/Low oil pressure/High engine temperature/Pump ready to start/Engine fail to start/Alarm silenced/Engine over speed shutdown
Easy system setup using HMI touch screen menu
Local engine stop push button with terminals for remote engine stop
Audible alarm & mute for engine run & common fault
Voltage free contacts for FIB for Engine run/Common fault/Power fail
Data logging all fault conditions, manual & auto start events up to 5000 logs
Engine overspeed shutdown protection with manual reset including test facility.
Loose supply of oil pressure transducer, oil or water temperature sender (optional)
All housed in a 700mmH x 500mmW x 250mmD metal enclosure painted in signal red.
|
Click image for close-up
Electric Fire Pump Controls (D.O.L)
IMAGE 7-3:
D.O.L starting up to 15kw!!
The Electric Fire Pump control panel is supplied in D.O.L up to 15kw 415V and is manufactured to comply with AS 2941.
The panel is standard with:
Circuit breakers for battery and alarm.
Complies to AS 2941.
Terminals for connection of 240V Jacking Pump.
Battery charger for battery monitoring.
D.O.L starting sized to suit motor.
Indicating lights for: Main supply On and fail, pump run battery charger 240V On and alarm muted.
Audible alarm and mute.
All housed in a metal enclosure painted in signal red.
|
Click image for close-up
Electric Fire Pump Controls (Soft Starter)
IMAGE 7-4:
Soft Starter starting from 18.5kw!!
The Electric Fire Pump control panel is supplied in Soft Starter from 18.5kw 415V and is manufactured to comply with AS 2941.
The panel is standard with:
Circuit breakers for battery and alarm.
Complies to AS 2941.
Terminals for connection of 240V Jacking Pump.
Battery charger for battery monitoring.
Soft Starter starting sized to suit motor.
Indicating lights for: Main supply On and fail, pump run battery charger 240V On and alarm muted.
Audible alarm and mute.
All housed in a metal enclosure painted in signal red.
|
|
)
)
)
)
)